- F3 / F3S / F3T / LTD
- RT / RTS / RT LTD
- ST / STS / ST LTD
- GS / RS / RSS
- Trailer Add On's
- LED LIGHTING
- SWAY BARS
- HIGHWAY BRACKETS /PEGS
- EXTRA STUFF
- FREE SHIPPING IN THE CONTINENTAL USA
THE FULL VIEW TURN SIGNALS LETS EVERYONE AROUND YOU KNOW THAT YOU ARE TURNING!
THEY WILL LET YOU KNOW THAT YOU LEFT THEM ON ALSO.
WON'T BLIND YOUR VISION AS THEY ARE BELOW THE MIRROR.
EASY INSTALL WITH PLUG AND PLAY WITH NO DRILLING!
JUST STICK THEM ON PLUG THEM IN AND AWAY YOU GO.
YES, THEY COME AS A PAIR FOR BOTH SIDES.
RECOMMENDED FOR 2014 AND UP AS THE FAST FLASHING CAN BE PROGRAMED OUT WITH THE INCLUDED INSTRUCTIONS.
YOU WILL EXPERENCE FAST FLASHING WITH EARLIER MODELS.
Very easy to install Plug & Play and makes a great difference very bright.
Walter Hand on Apr 10th 2017
I put these on myself and the install was easy. Except the mirror removal, no one likes to do that, but it is easy with the plug n play wire connections and the instructions that come with it. I installed them where it says to, and I learned that while driving, I can't see the lights at all. So don't expect them to remind you that your blinkers are still on if you install them where it says to. In hindsight, I would move them back to the back edge of the mirror housing Rick Feiner on Apr 2nd 2017
These turn signal lights not only improved visibility from behind but did a great job with visibility from the side. The plug and play system takes only minutes to install without any drilling. I have recommended these to all my Spyder friends. Roland Sanchez on Mar 26th 2017
This is a very well thought out design and you get everything you need in the installation. However, the installation did not go well for me the first time and the cable broke away from the LED lighting strip and I had to purchase another kit. Being honest, this was my fault in two parts. The first mistake was I installed the lighting strip on the mirror casing and not the mirror surround frame. The second mistake was I installed the lighting strip too near the slot where the cable feeds through. When I bent the black shrink wrap to go through the slot, it broke away from the LED strip. The installation is correct in the photos, but the photos are a little on the dark side and I believe there should be a couple of notes/warnings on the precise location on the LED strip. From my first installation experience, I learned to be very careful by not exerting any bending or twisting motion where the cable joins the LED strip. Outside of this, I am very happy with the installation. The tip sheet to sync the new strips to the Spyder system was also well received. James on Jan 3rd 2017
Was easy to install and they light up really good. Not only can I see if I left my turn signals on but at night if some one can't see them there BLIND.
Don't even notice them until there lit up. Great product guys. BERT on Nov 22nd 2016
I love these lights. Very bright and so easy to install. Instructions were great. Paul on Oct 9th 2016
Very bright, very easy to install. I drilled a small to run the wire, instead of putting it in the groove. Rod Karmitz on Sep 20th 2016
Removal of the mirrors is the only challenge of the installation. Just follow the included instructions to guide you through the removal and you are over half way done. Spyderpops sends everything you need to do a professional installation including the power bridges to avoid any cutting or splices. I also appreciated the instructions to take care of the hyper flash. Be safe and seen! Kevin on Aug 21st 2016
Simple to install, looks better than the existing ones that I installed and brighter
Corey Smith on Jun 16th 2016
The full view turn signals are easy to install. Really like the plug and play wiring set. I did find that the LED strip was actually long enough to go all the way up the side of the mirror housing and all the way along the bottom. I did need to do the the hyper flash fix after the installation. Very happy with the results. Steve King on May 20th 2016