Front Trunk Organizer (F3 Models All Years)

pretty straight forward. would be easier if some one else installed it. i'm getting lazy.

Just installed my brake/turn/running LED lights. Spyderpops made this install as easy as could be. Took me just a few hours. It really lights up the back and does a fantastic job increasing my visibility. The connections are very durable and plugs right into the stock system leaving the stock system undamaged. Thank you for a great product!

These are great! Now that I have them I wouldn't be without them. At night they are an add safety and during they day they easily remind me that my blinker is on. Installation instructions are ok but I had to watch a you tube video on how to take the turn signals off.

The turn signal indicator lights on the RT dashboard are pathetically dim and are thus virtually useless during daylight hours. Add to that the fact that the turn signal switch push-to-cancel lacks a distinct and reassuring touch, and it isn't easy to tell what the turn signals are actually doing.

Enter Spyder Pops' LED mirror-mounted turn signal telltale light strips. The end result is a dramatic improvement, although getting there is a bit more trying than the instruction sheet would lead you to believe. The kit is complete with two LED light strips with adequately long red and black thin multi-strand wires (stripped and tinned ends), four crimp connectors, four insulated spade connectors, two alcohol wipes and a small tube of plastic preparation (to maximize adhesion of the peel and stick LED strips), and an generally useful instruction sheet. Photos could be a larger and clearer and the "drill here" arrows could be more accurately positioned but neither represents a serious problem. The crimp connectors, however, are a problem. They are bulky, and no matter how hard I tried I could not crimp the spade connectors enough to capture the small gauge wire on the LED strips. I tossed them and soldered the wires to the OEM signal wires on each mirror. A better solution would be the excellent Posit-Taps connectors but I didn't have any readily available.

Reconnect the wiring harnesses, poke the wiring back into the fairing, snap the mirrors back onto the fairing and be impressed with extra blinky-thing lighting. Note that the light strips are mounted to the underside of the upper mirror frame and not to the mirror itself. It may be apparent to some, but not to everyone.

Would I buy this product again? In a heartbeat.