The "Bad Boy" Horn Upgrade (RT Models 2017-19)

Great sound an louder than I thought. Came with the bracket and was a easy install. The hard part was to get to the existing horn to unplug the wires to hook them together to the new horn. Well worth the time on my 2018 Spyder RT.

Works great and a couple of install notes... First raise the front up as far as possible to drop the bottom panel first. I'm old and fat so climbing under and seeing was a bit of a hassle even with automotive ramps. If you do your own work I also recommend the push pin tool, Pop's sells them. Then lay the horn on the bottom of the area it gets mounted and run the wire. I looped it over the factory harness which keeps it away from the engine (heat). I doubt it's necessary but why not. Then out at the location shown in the instructions, hook it the factory harness and zip tie it to the horn bracket. Hit the button if the horn sounds good bolt it up and put your Spyder back together. It's much better than the stock horn.

Louder than OEM, but not as loud as my Valkyrie air horns.